Menu
Your Cart

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
Out Of Stock
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
Ksh 110,500
Ex Tax: Ksh 110,500
  • Stock: Out Of Stock
  • Model: DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

Product Highlights

  • Supports Cameras up to (3.6 kg)
  • Transmitter for Remote Pan/Tilt Control
  • Precision of Control: ±0.02°
  • Toolless Balance Adjustment System

Overview

The Ronin-M from DJI is a 3-Axis Handheld Gimbal Stabilizer that is designed to provide the operator with the freedom of clear handheld shoots without hand-shake. It is well suited for most camera types and holds up to 8 pounds (3.6 kg). It uses brushless motors that work on three axes: one for side-to-side "roll" (keeping the horizon level), one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105° up / 165° down plus a roll range of ±110°. The system also boasts of a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The Ronin-M supports dual-operator shooting. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.

As with other motorized gimbals, the Ronin-M also requires balancing before use after which you can configure this gimbal with your camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. It is also equipped with an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned for stability as every camera and lens combination has a different mass and weight distribution. A gimbal tuning stand is also included so you won't have to hand-hold the rig during this process.

The included 4S lithium-ion polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12 VDC D-Tap ports and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regimen and avoid unnecessary added weight.

Features

  • For Cameras up to 3.6 kg (8 lb)
  • SmoothTrack Control
  • Auto Configuration
  • Three Operation Modes
  • - Upright Operation Mode
    - Underslung (Suspended) Operation Mode
    - Briefcase Mode
  • Second Operator Control
  • Optional Thumb Controller for Pan / Tilt
  • Assistant Software for Mobile and Windows
  • Tool-Free Adjustment
  • Universal Mounting
  • Solid Support Arm
  • Silent Mode
  • Quick Release Smart Battery
  • Power Distribution Box
  • Quick Release Top Handle
  • Based on Zenmuse Technology (- brushless motor technology)

Compatible Accessories

  • Wireless Thumb Controller for Ronin-M (Note: The Wireless Thumb Controller for Ronin is not compatible)
  • Ronin-M Battery (Note: the Ronin Battery (3400mAh) is not compatible)
  • Ronin Charger (same charger as used by original Ronin)
  • Ronin-M Monitor/Accessory Mount
  • Ronin-M Vertical Adjustment Arm Extension Kit (30mm)

In the box

  • DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
  • 2 x DJI Intelligent Battery for Ronin-M (1580mAh)
  • Ronin-M Transmitter (Controller)
  • Battery Charger
  • Handle Bar
  • Tuning Stand
  • Cable Pack
  • Micro-USB Cable
  • Camera Mounting Plate
  • 2 x Camera Screw A (1/4"-20)
  • 2 x Camera Screw B (3/8"-16)
  • 2 x Camera Screw C (1/4"-20)
  • 2 x Camera Screw D (3/8"-16
  • Lens Support Screw
  • Lens Support
  • 2 x Allen Wrench

Write a review

Note: HTML is not translated!
Bad Good